Effective electrostatic confinement of polysulfides in lithium/sulfur batteries by a functional binder

Publication Type

Journal Article

Date Published

01/2017

Authors

DOI

Abstract

Lithium/sulfur (Li/S) batteries have been recognized as one of the most promising substitutes for current energy-storage systems due to their high-energy density and low cost. However, the high solubility of intermediate products (i.e., lithium polysulfides) and the resultant shuttle effect lead to a rapid capacity fading along with a low Coulombic efficiency, which hinders the practical application of Li/S batteries. Herein, polyethylenimine (PEI) polymer is applied as a polar binder in Li/S batteries to address above issues. The sulfur cathode with a high sulfur loading density of 8.6 mg/cm2 coated by an ultrathin PEI layer (~ 6.9 nm) shows a high initial areal capacity of up to 9.7 mAh/cm2. The capacity is still maintained at 6.4 mAh/cm2 after 50 cycles, which is comparable to that of commercial Li-ion batteries. The excellent cycling performance is attributed to the presence of abundant amino groups in PEI polymer, which can strongly bond with the intermediate lithium polysulfides through electrostatic force and therefore suppress the shuttle effect, as revealed by in situ/operando ultraviolet-visible spectroscopy and S K-edge X-ray absorption spectroscopy. Our effective strategy of immobilizing lithium polysulfides by electrostatic force through a functional binder should be of great significance for the practical application of Li/S batteries.

Journal

Nano Energy

Volume

40

Year of Publication

2017

ISSN

22112855

Organization

Research Areas